1/50 Scale Miniature Painting Costs

chalel _l-1.jpg
chalel _l-1.jpg

Extra Options and Costs

1/50 scale miniature painting and modelling costs


Our painting is of a very high standard, and above any tabletop standard To our Gallery

 

Inf application:

After a primer is applied, individual layers are painted with blending taking place between each layer, any additional highlights are applied to produce a very nice looking miniature that you will feel proud of whether on the tabletop or on a display stand. Example-coming soon


NB Decal application on an Infantry Figure
At the moment we do not offer that service!! Painting German runes on collars and eagles on headwear where accessible are inc in the figure cost.

Vehicles application:
Vehicles are cleaned up then primed followed by airbrushed modulation. Camo is then airbrushed onto the vehicle, and any weathering applications and highlighting are then applied.. Camo netting and or bush (if needed) is then created and applied. Finally, the miniature is completed with a Matt varnish. Example-coming soon

FOR OUR 28MM  SCI-FI/WARHAMMER 40K HEROIC  PRICES CLICK HERE

FOR OUR 28MM  DISPLAY STANDARD PRICES CLICK HERE​

FOR OUR 28MM  COMPANY PRODUCT LUNCH PRICES CLICK HERE​

NB Basing costs include time and materials to produce a completed base.

  • Infantry figure £15.00 each (Camo uniforms/smocks etc add £2.00)  Pea Dot / Plane Tree style £17.00 per fig Pioneers add £1.00, Special Characters £17.00 eg Stoessi Heroes. intricate uniform patterns add £3.00 per figSpecial Characters £17.00 eg Stoessi Heroes.(Camo uniforms/smocks etc add £1,00) Pea Dot/Plane Tree + £1.00
    NB NO PEDOT COMMISSIONS TAKEN UNTIL FURTHER NOTICE

 

  • Inf base texturing & grass flocking per single inf stand 2.00p, (this inc's flower/bush grit, time etc) please supply bases. (The basing process does take quite some time to complete)

​​

  • Inf base texturing & snow flocking per single inf stand 2.00p, (inc winter tuff/bush grit time) please supply bases. (The basing process does take quite some time to complete)

​​

  • 3 x man Inf base texturing and flocking per single inf stand 4.65p, (inc either spring/winter treatment. please supply bases NB See examples of applications in the gallery

​​

  • Artillery base texturing eg 57mm/ 75mm  size and grass flocking per single stand £4.00 (inc s flower/bush grit) or winter tuff/bush grit and time please supply bases

​​

  • Vehicle base texturing & grass flocking per single stand £3.90, (inc s flower/bush grit time)
    please supply bases

​​

  • Camo US Vietnam/USMC Pacific Helmets £2.00. Blanket roll £2.50 per fig.Germ Pea Dot camo add £3,00 per fig.

​​

  • Mortar base texturing- Med base this inc's flower/bush grit, time etc) please supply bases. £1.85

  • Small Anti Tank guns ie US 57mm £13.50 (depending on size)

​​

  • Extra/basing 75p - £1.50 (sandbags/logs etc)*

  • 105 artillery battery size £30.50 + £1.00 for 3 tone camo pattern

​​

  • Small Vehicles/jeeps/Small Tanks (Early war) £20,00 - £23.50 add figure's cost if needed

​​

  • Trailers: £12.50 inc baggage if required.

 

  •  Half-tracks £30..50 + £1.00 for camo pattern and 70p for interior

.

  • Tanks/LAVs/APCs  £35.00 +£1.00 for (2/3 colour airbrushed camo pattern) (scale larger than 28mm)

  • Tanks Display Standard £45.00 +£1.00 for (2/3 colour airbrushed camo pattern)

  • Puma £33.50 + £1.00 for painted (2/3 colour airbrushed camo pattern

​​

  • Katyusha Rocket Launcher £27.50

​​

  • Trucks £29.50 (+ £1.00 for painted (2/3 colour airbrushed camo pattern)
    (based on request-see basing cost above)

  • Mini Vignets visit the (GALLERY) does not inc figures or gun. From £35.00

Extra Options and Costs
28mm for the website-what you get-pic2.j

EXTRA OPTIONS Example 
 

We offer the following additional modeling effects for your needs:
 

There is a basic/standard cost for painting the tank/vehicle. You can add on additional effects to the tanks and
vehicles priced individually.

CLICK HERE for examples of application

warrior_l-13psd.jpg

Additional Costs and Extra Options

  • Camo netting with foliage application  £4.00 small  / Medium £ 7.00 /  Large £ 9.00  per vehicle this includes (time and materials) see the gallery

  • Addition of pea dots to a vehicle 2.50p

 

  • Addition of Mud/dust general weathering/Scratches £3.00 per vehicle

  • Rust addition Minor (Tips of skirts some on tracks ) £1.75  major area £2.50p

 

  • Foliage without netting £2.70 small  / Medium £4.00 / Large £ 7.00  per vehicle this includes (time and materials) see the gallery

 

  • Damage to the vehicle (Scratchesshell holes/bullet holes broken side skirts plates etc) £2.50 per vehicle. Contact us with your requirements

  • Tank Kill Rings 75p Up to four rings

​​

  • Winter camo paint effect Add £5.50 per vehicle. The process is to apply airbrush light layers building up to the final layer over the completed modulated paint/camo work panel lining, weathering and chipping effects are also applied at this stage. See Winter Gallery for examples 

  • Decal Application £3.50 per vehicle   The process can be fiddly and does take time to complete. Transfer/s are cut out from the decal sheet. Micro Set is applied to the decal target area. Decals are then softened in water and then added to the vehicle then moved into place. Turret numbers are then added individually and aliened up very carefully. The decals are then allowed to dry and varnish is applied over the top to protect and make ready for any weathering.


 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 





 

 

 

 

 

 

 




Assembly of Infantry miniatures

Multi-part Plastic/resin: Cutting from sprues and assembling Arms, legs, head, weapons and kit £2.50 per figure

Assembly of Vehicles

Resin/plastic 4 part or multi-part kit assembling your minis can be time-consuming.


Resin/plastic and 4 /5 part metal kits occur a basic charge of £6.00. and £2.00 on for additional filing/sanding etc
 

Assembling tanks/Vehicles/Helicopters 

 

  • Helicopters multi-part  £14.00 per kit

Multi-part assembly ie is time-consuming (sometimes up to 50/60 mins to 1 hr per tank, and 10 mins per figure from cutting out from SPRUE filing/filling and glueing arms heads and weapons etc  (I'm reluctantly having to charge a flat/min fee for this Multi-part assembly service). 


 
NB I'm happy if you wish to send assembled. This will save time for your order and turnaround would be quicker.

please make sure all mould lines and flash are removed before sending.


 

Assembling Multi-part Infantry

From SPRUES cutting and cleaning up sprue marks, dry fitting and then glueing together and drying time etc nominal charge of £1.00p per figure depending on how many parts (eg bags/haversacks, tools etc to add

 

NB If you are sending assembled miniatures over to MFP, MFP RECOMMEND THAT YOU MAKE SURE THEY ARE WASHED IN A SUITABLE DEGREASING AGENT, BEFORE ASSEMBLY. IF NOT THERE IS A RISK THAT ANY PAINT applied MAY RUB OFF THE SURFACE due to the casting release agent remaining on the surface. 

 

It is the clients' responsibility to make sure this has been completed. if you are sending assembling minis over

If MFP is building miniatures for you MFP will complete this process for you.
NB I'm happy if you wish to send assembled

 

Currency-converter (Click link below)

http://finance.yahoo.com/currency-converter/?u#from=GBP;to=CAD;amt=150.

 

NB If providing figures please send your bases with miniatures. 

 

NB Prices are the total cost for painting/modelling and all materials etc. P&P is to be added to the final cost
Please see MFP terms and conditions before ordering a painting commission. All commissions are taken on the basis that these have been accepted.

warrior-asembly